Bagaimana cara merakit crusher kasar licorice?

1. persiapan:
Pertama -tama periksa apakah bagian peralatan lengkap, termasuk bingkai utama, ruang penghancuran, motor, grup blade, penutup pelindung, layar, baut penghubung, dll ., dan menyiapkan kunci pas, obeng, dan alat lain. Bersihkan area perakitan untuk memastikan bahwa situsnya rata dan kering untuk mencegah debris {{{{{{{{{{2 {{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{.

2. instal bingkai dan motor utama:
Tempatkan bingkai utama pada tanah yang stabil dan sesuaikan ke keadaan horizontal dengan level untuk mencegah peralatan bergetar selama operasi . hoist atau tempatkan motor di posisi yang sesuai dari bingkai, sejajarkan port koneksi poros motor dengan ruang penghancuran dan perbaiki motor basis dengan baut untuk memastikan bahwa koneksi kencang dan tidak longgar.}} {1} {1} {1} {1} {{1} {1} {1} {{1} {1 {{1} {1 {{{1 {{{1 {1 {{1 {{{1 {{1 {{{1 {1

3. merakit rakitan penghancuran:
Open the crushing chamber housing, install the blade group on the rotating shaft according to the direction of the manual, and tighten the fixing nut to ensure that the blade spacing is uniform. Install a screen with a suitable aperture as required, embed the edge of the screen into the crushing chamber slot, and fix it with a pressure strip and screws to ensure that the screen is flat and not shifted.

4. Hubungkan sirkuit listrik:
A professional electrician shall operate and connect the motor wires to the control box according to the circuit diagram to ensure that the positive and negative poles correspond correctly. Install electrical components such as the emergency stop button and power switch, connect the ground wire to ensure the safety of electricity use, and check the insulation of the circuit after completion to avoid the risk of a short circuit.

5. instal penutup pelindung dan debug:
Install the protective grille of the crushing chamber and the outer shell protective cover in place in turn, and ensure that the buckles or screws are firmly fixed without gaps. Turn on the power supply for a no-load test run, observe whether the equipment runs smoothly and whether there is any abnormal noise, check whether the linkage of each component is normal, and put it into use after confirmation.

Jika Anda ingin tahu lebih banyak tentang crusher kasar licorice, silakan hubungi manufaktur mesin Jiangyin Baoli, kami dapat memberikan solusi optimisasi proses .

https: // www . bolymill . com/